Package com.google.type

Interface PostalAddressOrBuilder

All Superinterfaces:
com.google.protobuf.MessageLiteOrBuilder, com.google.protobuf.MessageOrBuilder
All Known Implementing Classes:
PostalAddress, PostalAddress.Builder
public interface PostalAddressOrBuilder extends com.google.protobuf.MessageOrBuilder

  • Method Details

    • getRevision

      int getRevision()
       The schema revision of the `PostalAddress`. This must be set to 0, which is
 the latest revision.
 All new revisions **must** be backward compatible with old revisions.
      int32 revision = 1;
      Returns:
      The revision.

    • getRegionCode

      String getRegionCode()
       Required. CLDR region code of the country/region of the address. This
 is never inferred and it is up to the user to ensure the value is
 correct. See http://cldr.unicode.org/ and
 http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html
 for details. Example: "CH" for Switzerland.
      string region_code = 2;
      Returns:
      The regionCode.

    • getRegionCodeBytes

      com.google.protobuf.ByteString getRegionCodeBytes()
       Required. CLDR region code of the country/region of the address. This
 is never inferred and it is up to the user to ensure the value is
 correct. See http://cldr.unicode.org/ and
 http://www.unicode.org/cldr/charts/30/supplemental/territory_information.html
 for details. Example: "CH" for Switzerland.
      string region_code = 2;
      Returns:
      The bytes for regionCode.

    • getLanguageCode

      String getLanguageCode()
       Optional. BCP-47 language code of the contents of this address (if
 known). This is often the UI language of the input form or is expected
 to match one of the languages used in the address' country/region, or their
 transliterated equivalents.
 This can affect formatting in certain countries, but is not critical
 to the correctness of the data and will never affect any validation or
 other non-formatting related operations.
 If this value is not known, it should be omitted (rather than specifying a
 possibly incorrect default).
 Examples: "zh-Hant", "ja", "ja-Latn", "en".
      string language_code = 3;
      Returns:
      The languageCode.

    • getLanguageCodeBytes

      com.google.protobuf.ByteString getLanguageCodeBytes()
       Optional. BCP-47 language code of the contents of this address (if
 known). This is often the UI language of the input form or is expected
 to match one of the languages used in the address' country/region, or their
 transliterated equivalents.
 This can affect formatting in certain countries, but is not critical
 to the correctness of the data and will never affect any validation or
 other non-formatting related operations.
 If this value is not known, it should be omitted (rather than specifying a
 possibly incorrect default).
 Examples: "zh-Hant", "ja", "ja-Latn", "en".
      string language_code = 3;
      Returns:
      The bytes for languageCode.

    • getPostalCode

      String getPostalCode()
       Optional. Postal code of the address. Not all countries use or require
 postal codes to be present, but where they are used, they may trigger
 additional validation with other parts of the address (e.g. state/zip
 validation in the U.S.A.).
      string postal_code = 4;
      Returns:
      The postalCode.

    • getPostalCodeBytes

      com.google.protobuf.ByteString getPostalCodeBytes()
       Optional. Postal code of the address. Not all countries use or require
 postal codes to be present, but where they are used, they may trigger
 additional validation with other parts of the address (e.g. state/zip
 validation in the U.S.A.).
      string postal_code = 4;
      Returns:
      The bytes for postalCode.

    • getSortingCode

      String getSortingCode()
       Optional. Additional, country-specific, sorting code. This is not used
 in most regions. Where it is used, the value is either a string like
 "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number
 alone, representing the "sector code" (Jamaica), "delivery area indicator"
 (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).
      string sorting_code = 5;
      Returns:
      The sortingCode.

    • getSortingCodeBytes

      com.google.protobuf.ByteString getSortingCodeBytes()
       Optional. Additional, country-specific, sorting code. This is not used
 in most regions. Where it is used, the value is either a string like
 "CEDEX", optionally followed by a number (e.g. "CEDEX 7"), or just a number
 alone, representing the "sector code" (Jamaica), "delivery area indicator"
 (Malawi) or "post office indicator" (e.g. Côte d'Ivoire).
      string sorting_code = 5;
      Returns:
      The bytes for sortingCode.

    • getAdministrativeArea

      String getAdministrativeArea()
       Optional. Highest administrative subdivision which is used for postal
 addresses of a country or region.
 For example, this can be a state, a province, an oblast, or a prefecture.
 Specifically, for Spain this is the province and not the autonomous
 community (e.g. "Barcelona" and not "Catalonia").
 Many countries don't use an administrative area in postal addresses. E.g.
 in Switzerland this should be left unpopulated.
      string administrative_area = 6;
      Returns:
      The administrativeArea.

    • getAdministrativeAreaBytes

      com.google.protobuf.ByteString getAdministrativeAreaBytes()
       Optional. Highest administrative subdivision which is used for postal
 addresses of a country or region.
 For example, this can be a state, a province, an oblast, or a prefecture.
 Specifically, for Spain this is the province and not the autonomous
 community (e.g. "Barcelona" and not "Catalonia").
 Many countries don't use an administrative area in postal addresses. E.g.
 in Switzerland this should be left unpopulated.
      string administrative_area = 6;
      Returns:
      The bytes for administrativeArea.

    • getLocality

      String getLocality()
       Optional. Generally refers to the city/town portion of the address.
 Examples: US city, IT comune, UK post town.
 In regions of the world where localities are not well defined or do not fit
 into this structure well, leave locality empty and use address_lines.
      string locality = 7;
      Returns:
      The locality.

    • getLocalityBytes

      com.google.protobuf.ByteString getLocalityBytes()
       Optional. Generally refers to the city/town portion of the address.
 Examples: US city, IT comune, UK post town.
 In regions of the world where localities are not well defined or do not fit
 into this structure well, leave locality empty and use address_lines.
      string locality = 7;
      Returns:
      The bytes for locality.

    • getSublocality

      String getSublocality()
       Optional. Sublocality of the address.
 For example, this can be neighborhoods, boroughs, districts.
      string sublocality = 8;
      Returns:
      The sublocality.

    • getSublocalityBytes

      com.google.protobuf.ByteString getSublocalityBytes()
       Optional. Sublocality of the address.
 For example, this can be neighborhoods, boroughs, districts.
      string sublocality = 8;
      Returns:
      The bytes for sublocality.

    • getAddressLinesList

      List<String> getAddressLinesList()
       Unstructured address lines describing the lower levels of an address.
 Because values in address_lines do not have type information and may
 sometimes contain multiple values in a single field (e.g.
 "Austin, TX"), it is important that the line order is clear. The order of
 address lines should be "envelope order" for the country/region of the
 address. In places where this can vary (e.g. Japan), address_language is
 used to make it explicit (e.g. "ja" for large-to-small ordering and
 "ja-Latn" or "en" for small-to-large). This way, the most specific line of
 an address can be selected based on the language.
 The minimum permitted structural representation of an address consists
 of a region_code with all remaining information placed in the
 address_lines. It would be possible to format such an address very
 approximately without geocoding, but no semantic reasoning could be
 made about any of the address components until it was at least
 partially resolved.
 Creating an address only containing a region_code and address_lines, and
 then geocoding is the recommended way to handle completely unstructured
 addresses (as opposed to guessing which parts of the address should be
 localities or administrative areas).
      repeated string address_lines = 9;
      Returns:
      A list containing the addressLines.

    • getAddressLinesCount

      int getAddressLinesCount()
       Unstructured address lines describing the lower levels of an address.
 Because values in address_lines do not have type information and may
 sometimes contain multiple values in a single field (e.g.
 "Austin, TX"), it is important that the line order is clear. The order of
 address lines should be "envelope order" for the country/region of the
 address. In places where this can vary (e.g. Japan), address_language is
 used to make it explicit (e.g. "ja" for large-to-small ordering and
 "ja-Latn" or "en" for small-to-large). This way, the most specific line of
 an address can be selected based on the language.
 The minimum permitted structural representation of an address consists
 of a region_code with all remaining information placed in the
 address_lines. It would be possible to format such an address very
 approximately without geocoding, but no semantic reasoning could be
 made about any of the address components until it was at least
 partially resolved.
 Creating an address only containing a region_code and address_lines, and
 then geocoding is the recommended way to handle completely unstructured
 addresses (as opposed to guessing which parts of the address should be
 localities or administrative areas).
      repeated string address_lines = 9;
      Returns:
      The count of addressLines.

    • getAddressLines

      String getAddressLines(int index)
       Unstructured address lines describing the lower levels of an address.
 Because values in address_lines do not have type information and may
 sometimes contain multiple values in a single field (e.g.
 "Austin, TX"), it is important that the line order is clear. The order of
 address lines should be "envelope order" for the country/region of the
 address. In places where this can vary (e.g. Japan), address_language is
 used to make it explicit (e.g. "ja" for large-to-small ordering and
 "ja-Latn" or "en" for small-to-large). This way, the most specific line of
 an address can be selected based on the language.
 The minimum permitted structural representation of an address consists
 of a region_code with all remaining information placed in the
 address_lines. It would be possible to format such an address very
 approximately without geocoding, but no semantic reasoning could be
 made about any of the address components until it was at least
 partially resolved.
 Creating an address only containing a region_code and address_lines, and
 then geocoding is the recommended way to handle completely unstructured
 addresses (as opposed to guessing which parts of the address should be
 localities or administrative areas).
      repeated string address_lines = 9;
      Parameters:
      index - The index of the element to return.
      Returns:
      The addressLines at the given index.

    • getAddressLinesBytes

      com.google.protobuf.ByteString getAddressLinesBytes(int index)
       Unstructured address lines describing the lower levels of an address.
 Because values in address_lines do not have type information and may
 sometimes contain multiple values in a single field (e.g.
 "Austin, TX"), it is important that the line order is clear. The order of
 address lines should be "envelope order" for the country/region of the
 address. In places where this can vary (e.g. Japan), address_language is
 used to make it explicit (e.g. "ja" for large-to-small ordering and
 "ja-Latn" or "en" for small-to-large). This way, the most specific line of
 an address can be selected based on the language.
 The minimum permitted structural representation of an address consists
 of a region_code with all remaining information placed in the
 address_lines. It would be possible to format such an address very
 approximately without geocoding, but no semantic reasoning could be
 made about any of the address components until it was at least
 partially resolved.
 Creating an address only containing a region_code and address_lines, and
 then geocoding is the recommended way to handle completely unstructured
 addresses (as opposed to guessing which parts of the address should be
 localities or administrative areas).
      repeated string address_lines = 9;
      Parameters:
      index - The index of the value to return.
      Returns:
      The bytes of the addressLines at the given index.

    • getRecipientsList

      List<String> getRecipientsList()
       Optional. The recipient at the address.
 This field may, under certain circumstances, contain multiline information.
 For example, it might contain "care of" information.
      repeated string recipients = 10;
      Returns:
      A list containing the recipients.

    • getRecipientsCount

      int getRecipientsCount()
       Optional. The recipient at the address.
 This field may, under certain circumstances, contain multiline information.
 For example, it might contain "care of" information.
      repeated string recipients = 10;
      Returns:
      The count of recipients.

    • getRecipients

      String getRecipients(int index)
       Optional. The recipient at the address.
 This field may, under certain circumstances, contain multiline information.
 For example, it might contain "care of" information.
      repeated string recipients = 10;
      Parameters:
      index - The index of the element to return.
      Returns:
      The recipients at the given index.

    • getRecipientsBytes

      com.google.protobuf.ByteString getRecipientsBytes(int index)
       Optional. The recipient at the address.
 This field may, under certain circumstances, contain multiline information.
 For example, it might contain "care of" information.
      repeated string recipients = 10;
      Parameters:
      index - The index of the value to return.
      Returns:
      The bytes of the recipients at the given index.

    • getOrganization

      String getOrganization()
       Optional. The name of the organization at the address.
      string organization = 11;
      Returns:
      The organization.

    • getOrganizationBytes

      com.google.protobuf.ByteString getOrganizationBytes()
       Optional. The name of the organization at the address.
      string organization = 11;
      Returns:
      The bytes for organization.